TP-Link Tapo C120
Wi-Fi plus an outlet: separate microSD storage, continuous recording and 2.4 GHz networking. Wireless data is not wireless power. Maker source.
As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure
How a camera connects decides how it's powered, whether it can record 24/7 and what it costs to run. None of the three needs a subscription to record locally, but a cellular camera always comes with a data plan.
See the sourced options for this question
Wi-Fi plus an outlet: separate microSD storage, continuous recording and 2.4 GHz networking. Wireless data is not wireless power. Maker source.
PoE cable runs: four cameras receive power and send video to the included NVR over Ethernet. No Wi-Fi is needed for local recording. Maker source.
Cellular when Wi-Fi and cabling cannot reach: solar/battery power and a 32 GB card are included. Needs a compatible carrier and paid data for 4G; not 24/7. Maker source.
| Wi-Fi | PoE (Ethernet) | Cellular (4G) | |
|---|---|---|---|
| Power | Outlet, battery or solar | The same Ethernet cable | Usually battery and solar |
| Signal | Your Wi-Fi network | Wired to your network or NVR | A mobile network |
| 24/7 recording | Plug-in models only | Yes, the usual setup | Rare; battery models record clips |
| Records with no internet | To a card, on many models, after setup | Yes, to the NVR | Depends on the model |
| Recurring cost | None required | None required | A data plan, always |
| Install effort | Low | High: a cable to each camera | Low |
| Examples here | Tapo C120, Wyze Cam v4, eufy S340, Argus 4 Pro | Reolink RLK8-800D4, Aqara G5 Pro (PoE), Reolink Video Doorbell PoE | eufy 4G LTE Cam S330 |
Most cameras sold today are Wi-Fi. A plug-in Wi-Fi camera can record 24/7 to a microSD card; a battery one records motion clips to save power. The catch is signal. Many cameras use only the 2.4 GHz band, which reaches further but is busier. The eufy S340 and Doorbell E340 are 2.4 GHz only, while the Reolink Argus 4 Pro and eufy Floodlight Cam E340 list dual-band Wi-Fi 6. If the camera is far from the router, check the signal at the spot with your phone before you mount it.
When Wi-Fi drops, a camera with a card often keeps recording. TP-Link says this for Tapo cameras after setup, and Wyze for the Cam v4. You can't watch live until the connection is back. Picks: outdoor wireless cameras.
Power over Ethernet sends power and data down one network cable. The common standard, IEEE 802.3af, is what the Aqara G5 Pro PoE needs from a switch or injector. An NVR kit like the Reolink RLK8-800D4 has PoE ports built into the recorder, so the cameras plug straight in. The Reolink Video Doorbell PoE is the same idea at the front door: Ethernet only, no Wi-Fi, and 24/7 recording to a card or NVR. Ethernet runs are specified up to 100 meters (328 feet). Reolink says its PoE cameras and NVRs keep recording without internet, which also makes PoE the answer for a place with no internet at all.
The work is in the cables: through walls, attics or soffits. See PoE systems for the picks.
A 4G camera has a SIM card and connects over a mobile network, so it works on a farm, a construction site or a vacation property with no internet. It can record locally to a card, but it needs a cellular data plan — a monthly cost that is not a camera subscription. The eufy 4G LTE Cam S330 is the 4G pick here: eufy says there is no monthly fee for recording, local storage or app features, that a 32 GB card is included (up to 128 GB), and that the camera also works on 2.4 GHz Wi-Fi and uses no cellular data while it's on Wi-Fi. Monthly cost puts the data plan in context.
You don't have to pick one connection for the whole house. A common setup is PoE cameras where you can run cable, such as under the eaves near the attic, plus a battery or solar Wi-Fi camera for a far corner of the yard. The catch is storage: cameras from different systems usually save to different places, so you end up with two apps and two histories. If you want everything on one recorder, choose cameras that support RTSP or ONVIF, or stay within one brand's hub. Local storage explained covers those options.
The finder follows the same logic and only rules out cameras for physical reasons. If you have no Wi-Fi at the spot, start with cameras without Wi-Fi. For solar options, see solar cameras.
Specs verified: November 2026 · Updated 2026-11-18 · How we research